Beschreibung
Inspiration
A wide shallow cone is the most efficient shape there is for lighting a table — it pushes light out to the edges instead of dropping it in the middle. Left plain at this diameter, though, it reads like a dish. Pleating the fabric solves that: the folds break the surface into fine vertical lines, so the eye follows the radius outward and a 31″ shade stays light on its feet. Everything gathers into one brass ring at the top.
Product Video
Key Features
Wide Pleated Cone
A shallow coolie-style cone of pleated fabric over a metal frame, with the folds keeping a large diameter visually light.
Brass Ring, Slim Cord
The pleats gather into a single brass-tone ring, hung on a slim cord whose drop is set at install.
Edge-to-Edge Spread
The cone angle throws light out as well as down, covering the width of a table rather than pooling at its centre.
Available Sizes
Ø 19.7″
Ø 50 × H 18 cm
19.7″ × H 7.1″
19.7″ × H 7.1″
Ø 23.6″
Ø 60 × H 22 cm
23.6″ × H 8.7″
23.6″ × H 8.7″
Ø 31.5″
Ø 80 × H 30 cm
31.5″ × H 11.8″
31.5″ × H 11.8″
Specifications
Fixture Type
Hardwired cord pendant · wide pleated fabric cone on a metal frame · three diameters
Materials & Finish
Metal frame with a cream pleated fabric shade · brass-tone ring, canopy, and cord · fabric tone varies slightly piece to piece
Light Source
1 × E27 medium screw socket · 40W maximum · accepts standard US E26 · warm white 3000K LED bulb included and replaceable · ambient and dining light rather than task light
Suspension
Slim cord with an adjustable drop, set at install
Mounting
Hardwired to a standard ceiling junction box · licensed electrician recommended
Hanging Height
Bottom of the shade 30–36″ / 76–91 cm above an island or dining table; higher in an entryway
Power & Rating
120V US · indoor dry locations only — the fabric shade isn’t damp-rated, so not for bathrooms with shower steam or outdoor use
Care
Dust along the pleats with a soft brush or a vacuum dusting attachment on low, not across them. Never soak the fabric; wipe the brass-tone parts dry.
Best For
Dining table, kitchen island, breakfast nook, entryway, living room
Design Style
FAQ
Which diameter suits my table?
Aim for a shade roughly half to two-thirds the width of the table. The 19.7″ suits tables around 30–36″ wide, the 23.6″ around 36–44″, and the 31.5″ needs a wide table, a long island, or a room with the ceiling height to carry it — in a standard 8 ft room it will dominate. On a long rectangular table, two of the smaller sizes often read better than one large.
Is one bulb enough for a dining table?
For dining, yes — the cone spreads a single bulb across the surface, which is why this shape works at these diameters. But the socket is capped at 40W, so treat it as ambient light: on a working kitchen island, or on the 31.5″ size where the same output covers more area, pair it with recessed or under-cabinet lighting rather than expecting it to carry prep work on its own.
How do I clean pleated fabric?
Work along the folds, not across them — brushing sideways flattens the pleats over time. A soft brush or a vacuum dusting attachment on low setting is enough for the dust that collects on the upper face, which is where it shows first on a wide cone. Don’t use water or fabric cleaners; a damp cloth leaves rings on the pleat edges.
Downloads
Technical reference for the Luneria Pendant Light. Need a doc that’s not listed, multiples over a long island, or trade pricing? .
Pending
